Fence Types We Install in Lexington
Each material has its own page with every style we carry and what drives its price.
Fencing in Lexington County
Lexington County fences are a different job from a Columbia city lot, and the differences decide the material and the post detail.
- Lake Murray lots. Shoreline and near-shore properties get wind off the water and, in many cases, a slope down to it. An open aluminum picket or a vinyl ranch rail keeps the view and carries wind well. A solid privacy panel on a lake slope is racked or stepped so it follows the grade without gaps.
- Sandy ground. Much of Lexington County sits on the Sandhills, and sandy soil does not grip a post the way clay does. We set posts deeper and in concrete, and we say so in the contract, because a fence in sand that was set like a fence in clay leans inside a few seasons.
- Subdivision rules. Many Lexington subdivisions carry HOA covenants on fence height, material, color and which side faces the street. We read the covenant before we quote, and the fence permit guide covers where Lexington County itself has a say.
- New construction. Lexington County is one of the fastest-growing parts of the Midlands, and a new lot often has no fence at all. That is the cleanest install there is: no tear-out, a clear survey and a straight run.
Styles Lexington homeowners ask for most: the Newbury tongue and groove vinyl privacy fence for a backyard screen, the Lexington flat top aluminum fence for a front yard or a pool, the Coronado vinyl ranch rail on a larger lot, and a board on board wood fence where the covenant asks for wood.
What Drives the Price of a Fence in Lexington
Every yard is different, so we set the exact number in writing after we walk the property.
- Linear footage, the single biggest factor.
- Material and style, from chain link at one end to molded composite at the other.
- Height and gates, taller runs and drive gates add material and hardware.
- Ground and access, sand, slope, roots and a tight side yard all add time.
- Old-fence removal, tearing out and hauling off an existing fence is its own line.
Real Midlands numbers are in the fence cost guide, broken out by material.
Serving Lexington County and the Midlands
© OpenStreetMap contributors © CARTO
Frequently Asked Questions
Do you install fences in Lexington, SC and Lexington County?add
Yes. Chonko Construction installs wood, vinyl, aluminum, composite, chain link and custom fences throughout Lexington County, including the town of Lexington, Lake Murray, Chapin, Gilbert and Red Bank, under one written contract.
Do I need a permit for a fence in Lexington County?add
It depends on the height, the location on the lot and whether the property sits inside town limits or an HOA. We confirm the requirement for your address before the contract is signed, and the fence permit guide walks through the Lexington County rules.
Which fence holds up on a Lake Murray lot?add
Open aluminum picket and vinyl ranch rail keep the view and let wind through. A solid privacy panel works on the lake when it is racked or stepped to the slope and set on deep concrete footings. We recommend the style after we see the grade.
How much does a fence cost in Lexington, SC?add
Cost depends on linear footage, material, height, gates and the ground. Every Chonko Construction fence starts with a written scope, schedule and price. Typical Midlands ranges by material are in our fence cost guide.
Can my HOA stop a fence in a Lexington subdivision?add
An HOA can set the height, material, color and which side faces out, and most Lexington subdivisions do. We read the covenant before we quote so the fence we price is the fence the board will approve.
Related Guides
How Much Does a Fence Cost in Columbia, SC?
material-by-material price ranges for the Midlands.
Do You Need a Permit to Build a Fence in Columbia, SC?
Richland and Lexington County rules, HOA sign-off and setbacks.
How to Measure for a Fence
linear feet, corners, gates and grade, so the number on the call is real.
Wood Fence Cost in Columbia, SC (2026)
A wood fence in Columbia starts at about $37 a linear foot installed, so a typical 150 to 300 foot yard starts around $5,550. What the posts, the style and the upkeep actually cost.
Vinyl Fence Cost in Columbia, SC (2026)
A vinyl fence in Columbia starts at about $48 a linear foot installed, so a 150 to 300 foot yard starts around $7,200. The styles, the finishes, and what separates good vinyl from the cheap stuff.
Mixed-Material & Custom Fence Cost in Columbia, SC (2026)
What a custom fence costs in Columbia and why it is quoted per project: the eight things that make a fence custom, the four kinds of mixed-material build, and the manufactured hybrid panels we install.
Composite Fence Cost in Columbia, SC (2026)
A composite fence in Columbia starts at about $75 a linear foot installed, so a 150 to 300 foot yard starts around $11,250. Who actually makes it, what drives the price, and who it is worth it for.
Chain-Link Fence Cost in Columbia, SC (2026)
Chain-link starts at about $24 a linear foot installed in Columbia, so a typical 150 to 300 foot yard starts around $3,600. Height, coating and gauge are what move it, and what a cheap bid leaves out.
Aluminum Fence Cost in Columbia, SC (2026)
An ornamental aluminum fence in Columbia starts at about $57 a linear foot installed, so a 150 to 300 foot yard starts around $8,550. Grades, gate costs, pool code, and what the price actually buys you.
Composite vs. Vinyl Fencing in Columbia, SC: An Honest Comparison
Composite or vinyl for a Midlands fence? What each one actually is, who makes it, the finishes you can get, why composite costs what it does, and how long each takes to land in your yard.
Start Your Lexington Fence
Free phone consultation
Talk through your project
A quick, no-pressure call to scope the work and answer your questions. Pick a time below and we will call you then.
- check_circleA licensed builder on the phone, not a call center
- check_circleWe scope the project and talk through your options
- check_circleIt books straight onto our calendar, no estimate pressure